Protek A333 Netzwerkanalysator

zum Testen und Herstellung von verschiedenen elektronischen Vorrichtungen in der Telekommunikation, Medizin, Auto- und HF-Komponenten benutzerfreundliche Fernsteuerschnittstelle PROTEC A333 Network Analyzer 300 kHz to 3,2 GHz Display 10,4 Inch Color LCD ( 800x600) Touch Screen User Interface USB2.0, Ethernet, Keyboard, Printer, Video Measurement Range Frequency Range 300 kHz to 3,2 GHz Impedance 50 Ohm ( 75 Ohm ) Test Port Connectors N-type, Female Number of Test Ports 2 Frequency Accuracy +/- 5 ppm Frequency Resolution 1 mHz Number of Test Points, User selectable 2 to 10001 IF Bandwidth settings: 1 / 1,5 / 2 / 3 / 5 / 7 / 10 steps 10 Hz to 30 kHz Dynamic Range at 2 to 3.200 MHz / at IF BW 10Hz >125 dB / typical 130 dB Measurement Time per Point at 30 kHz IF BW 125 µs Measurement Range Test Port Output Power Range -45 to +10 dBm Power Accuracy < 1 dB Power Resolution 0,05 dB Harmonic Distortion -3 dBc Test Port Input Match without System Error Correction > 25 dB Damage Level + 26 dBm Damage DC Voltage 35V Measurement Capabilities Number of measurement channels Up to 16 independent measurement channels. Each channel is couplet to stimulus response settings incl. frequency range and number of points Number of Windows Each measurement channel has a display Window Measurement parameters S11, S12,S21, S22 Measurement parameters conversion To convert S-Parameters into reflection impedance, transmission Data formats Impedances, refection admittance, and 1/S Log magnitude, linear amplitude, phase, expanded phase, group delay SWR, real, imaginary, Smith chart, polar. Data markers 10 independent marker per trace. Reference markers available for delta markers operation, Smith chart format includes 5 marker formats: Linear amplitude / phase, log magnitude / phase, real/ imaginary, R+jX and G+jB. Polar chart format includes 3 marker formats: linear magnitude / phase, log magnitude / phase, real/ imaginary. Markers function Marker search Max value, Min value, peak, peak left, peak right, target, target left, target right, multi-target, bandwidth parameter with user defined bandwidth Marker to function Set start, stop, center to active marker stimulus , set reference to active Marker response value, set electrical to group delay at active marker Search range user definable Tracking Performs marker search continuously or on demand. Time domain functions Transformation Selectable transformation type from bandpass, lowpass impulse, lowpass step. Selectable window from maximum, normal an minimum. Gated function Selectable gated filter type from bandpass, notch. Selectable gate shape from maximum, normal and wide. Source control Sweep type Linear sweep, segment sweep, log sweep and power sweep. Segment sweep Define independent sweep segments. Set number of points, test port, power levels, IF bandwidth, delay time independently for each segment. Sweep trigger Set to continuous, hold or single sweep Power Set source power from -45 dBm to 10dBm. The power slope function compensates source power level error with internal , external or manual trigger. Trace functions Display data Current measurement data, memory data or both simultaneously Trace math Vector addition, subtraction, multiplication or division of measured complex values and memory data Title Add custom title to each channel window. Titles are printed on hardcopies of displayed measurements. Auto scale Automatically selects scale resolution and reference value to vertical center the trace. Electrical delay Offset measured phase or group delay by a defined amount of electrical delay in seconds. Phase Offset measured phase or group delay by a defined amount in degrees. Statistics Calculates and displays mean, standard deviation and peak to peak deviation amount in degrees. Programming function COM / DCOM Automation LAN, GPIB ( optional )